Lift and Tilt Cylinder

Lift and tilt cylinders are used to move the bucket in wheel loaders. These cylinders are subjected to high dynamic loads and therefore need to be designed and built for extremely heavy-duty service. The tilt cylinder is a double-acting hydraulic cylinder, meaning it can both push and pull its load.

Challenge of the application

  • High temperature Requirement
  • Peak Pressures
  • Exposure to dusty env.
  • Higher sides loads

Sealing Solutions for Lift and Tilt Cylinder

Oring with Backup Ring
O-Rings are used in a variety of fields: they are either used as sealing elements or as energizing elements for hydraulic slipper seals and wipers. 
Know More
Orkot® Slydring® 
It prevents metal-to-metal contact between piston / rod and bore / gland, absorbing high transverse loads. It is capable of withstanding high side loads, damping vibrations and embedded foreign particles. Know more
Turcite® Slydring®
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick-slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible. Know More
Turcon® Glyd Ring® T
It provides optimum leakage control and good resistance to extrusion. The seal is a double-acting O-Ring energized piston seal for dynamic applications. Know More
Zurcon® U-Cup RU9
Rod seals are particularly exposed to pressure and friction and a long service life is a specific requirement of piston rods. Zurcon® U-Cup RU9 can offer this with its outstanding wear and extrusion resistance. It is also compatible with virtually all media, has a wide operating temperature range, gives low friction. It has compact installation dimensions and is ease to assemble. Know More
Turcon® Stepseal® 2K
It offers high sealing efficiency, low friction with no stick-slip, minimal break out force and high wear resistance. Optimum sealing characteristics are achieved by installing in a tandem Turcon® Stepseal® or Rimseal arrangement together with a double-acting scraper. Know More
Turcon® Excluder® 2
A double-acting O-Ring energized scraper that prevents the ingress of mud or other contaminants, increasing effective system service life. It has a secondary sealing capability for use with back pumping performance seals such as Turcon® Stepseal® 2K and Zurcon® Rimseal. Know More