Chip Compactor Cylinder

Chip compactor is used to compact waste metal scrap produced from metal cutting operations like milling, turning, boring etc., The compactor uses tons of force to press the scrap into briquettes of sizes. The force used to achieve this enables the briquettes to be highly dense, typically more than half the density of the original metal.

Challenge of the application

  • High Pressure Requirement
  • Exposure to Coolant media with Metal chips

Sealing Solutions for Chip Compactor Cylinder

Oring with Backup Ring
O-Rings are used in a variety of fields: they are either used as sealing elements or as energizing elements for hydraulic slipper seals and wipers. 
Know More
Orkot® Slydring® 
It prevents metal-to-metal contact between piston / rod and bore / gland, absorbing high transverse loads. It is capable of withstanding high side loads, damping vibrations and embedded foreign particles. Know more
Turcon® Glyd Ring® T
It provides optimum leakage control and good resistance to extrusion. The seal is a double-acting O-Ring energized piston seal for dynamic applications. Know more
Turcon® Stepseal® V
A single-acting O-Ring energized piston seal with hydrostatic pressure relief channel for dynamic applications. It prevents pressure trapping between seals under all service conditions. Know more
Turcon® AQ Seal®
A double-acting O-Ring energized seal developed for sealing between two media such as fluid and gas. It incorporates a limited footprint Quad-Ring®Seal / X-Ring inset into the dynamic sealing face. Installed in grooves to ISO 7425. Know more
Zurcon® Scraper DA22
A double-acting scraper with a sealing and scraping lip in injection molded polyurethane that can be installed in grooves to ISO 6195 type C. For applications in conjunction with seals that give back pumping performance, such as Turcon® Stepseal® 2K and Zurcon® Rimseal. Know more